Blogs

Why Wide-Turn Truck Accidents Create Difficult Liability Questions

Oct 2, 2026 | Truck Accidents

Wide-turn truck accidents occur when a large commercial vehicle needs additional roadway space to complete a turn and collides with another vehicle, cyclist, pedestrian, or object in or near its turning path. Liability can be difficult to determine because investigators must consider the truck driver’s actions, surrounding traffic, visibility, roadway design, and whether everyone involved used reasonable care.

At Folger Law Firm, we evaluate these factors when handling Arizona truck accident claims. A wide-turn collision should not automatically be blamed on either the truck driver or the smaller vehicle without examining how the turn developed.

Why Do Commercial Trucks Need So Much Space to Turn?

Large trucks maneuver differently from passenger vehicles because of their length, wheelbase, and trailer configuration. During a right turn, a tractor-trailer may need to move farther left before turning so the trailer can clear the curb, another vehicle, or another roadside obstacle.

The Federal Motor Carrier Safety Administration (FMCSA) specifically warns that trucks and buses need additional space and time to make wide turns. A large vehicle making a right turn may initially move left because it cannot easily complete the turn directly from the right side of the roadway.

That movement can sometimes confuse nearby drivers. A motorist may believe the truck is moving left or changing lanes when the driver is actually positioning the vehicle to complete a right turn.

For a Truck Accident Attorney, determining whether the truck’s movement was reasonably executed requires more than simply looking at where the vehicles ended up after impact.

How Can Blind Spots Contribute to a Wide-Turn Crash?

Commercial trucks have substantial blind spots around the vehicle. Those areas can become particularly important when a truck is preparing to turn.

A passenger vehicle, bicycle, or pedestrian positioned alongside a tractor-trailer may become difficult for the commercial driver to see. FMCSA advises drivers of large trucks to check their mirrors regularly and to make wide turns carefully while signaling appropriately.

However, the existence of a blind spot does not automatically determine who is responsible for a crash.

A Truck Accident Lawyer may examine whether the commercial driver properly checked mirrors, signaled the turn, reduced speed, observed surrounding traffic, and allowed sufficient clearance. At the same time, investigators may consider where the other road user was positioned and how that person approached the turning truck.

When Could the Truck Driver Be Responsible?

A commercial truck driver may potentially be responsible when negligent driving contributes to a wide-turn collision.

Examples can include failing to signal, turning without adequately checking surrounding traffic, taking the turn at an unsafe speed, failing to maintain reasonable control, or beginning the maneuver when another road user is already in a dangerous position.

The exact circumstances matter.

A Commercial Truck Accident Attorney may also evaluate whether the driver’s training and conduct were consistent with applicable safety requirements and accepted commercial driving practices. The purpose is not to assume that every wide turn is improper, but to determine whether the particular maneuver was performed with reasonable care.

Can Another Driver Share Responsibility for the Collision?

Yes. Arizona follows a pure comparative negligence system, so more than one person may bear a percentage of responsibility for an accident.

In a wide-turn scenario, another motorist could potentially contribute to a collision by attempting to pass a turning truck on the right, entering an unsafe gap between the truck and curb, or failing to respond reasonably to a clearly signaled turn.

FMCSA specifically cautions motorists not to squeeze between a commercial vehicle and the curb while the truck is making a right turn.

That does not mean the smaller vehicle is automatically at fault. A Truck Collision Attorney must consider what each person could reasonably see and whether the truck driver’s own conduct created or increased the danger.

Arizona’s comparative-fault rules allow responsibility to be allocated according to each party’s contribution to the accident.

Why Can Intersections and Roundabouts Create Additional Issues?

Wide-turn collisions commonly raise questions about lane position, right-of-way, traffic controls, and available turning space.

Roundabouts present a particularly Arizona-specific example. Arizona law requires motorists to yield to qualifying large trucks in roundabouts, and certain large trucks may deviate from their lane when necessary to safely negotiate the roundabout. ADOT explains that this rule applies to large trucks meeting specific length or width requirements.

That rule illustrates why commercial-truck maneuvering cannot always be evaluated using assumptions based on passenger vehicles.

A truck occupying additional roadway space does not, by itself, establish negligence. Investigators must determine whether the movement was legally permitted, reasonably necessary, and carried out safely.

What Evidence Can Help Determine Liability?

Wide-turn cases often depend on evidence showing the truck’s movements before the moment of impact.

Relevant evidence may include:

  • Intersection or business surveillance footage
  • Dash-camera recordings
  • Photographs and vehicle damage
  • Witness statements
  • Police crash reports
  • Electronic vehicle information when available
  • Driver logs and company records when relevant
  • Measurements of the roadway and intersection
  • Turn-signal and vehicle-position evidence

A Truck Crash Lawyer may also examine the tractor and trailer configuration because different commercial vehicles have different turning characteristics.

Evidence should be preserved as early as reasonably possible. Video recordings, company records, and other information may not remain available indefinitely.

How Common Are Serious Traffic Crashes in Arizona?

Arizona continues to experience a substantial number of roadway crashes. According to the Arizona Department of Transportation, 121,107 motor vehicle crashes occurred statewide in 2024, resulting in 1,228 traffic fatalities and more than 54,000 injuries.

Large commercial vehicles create additional safety concerns because of their size, maneuvering limitations, blind spots, and stopping distances. FMCSA identifies wide turns as one of the major safety challenges motorists should anticipate when sharing the road with trucks and buses.

These physical differences are also why determining what happened during a truck collision can require a more detailed investigation than simply identifying which vehicle entered which lane.

Who Else Could Be Relevant to a Wide-Turn Truck Accident Claim?

Although the truck driver’s conduct is often central, the investigation may extend beyond the person behind the wheel.

Depending on the facts, a trucking company or another entity connected to the commercial vehicle may become relevant to the claim. The applicable relationships, insurance coverage, vehicle ownership, and circumstances of the collision must be evaluated individually.

Our broader personal injury representation includes investigating liability and available evidence when another party’s negligence causes serious injuries.

What Should You Do After a Wide-Turn Truck Accident in Arizona?

Do not assume that the size or position of either vehicle automatically determines fault. Wide-turn truck crashes require careful examination of the turn itself, road position, signals, visibility, surrounding traffic, applicable rules, and the actions of everyone involved.

At Folger Law Firm, we investigate commercial truck crashes to identify how the collision occurred and who may be legally responsible. If you were injured in a wide-turn truck accident in Arizona, contact Folger Law Firm or call (602) 774-0033 to discuss your situation.